Filter
Top Products
22
Seat
Support
Post
Seat
Mounting
Support
Seat
Assembly
Wheelchair
Frame
Height
Mounting
Holes
FIGURE 4 - ADJUSTING THE SEAT HEIGHT - SEAT
ASSEMBLIES WITHOUT SEAT SUPPORT COLLARS
Seat Assemblies WITH Seat Support
Collars (FIGURE 5)
1. Remove the seat assembly. Refer to
REMOV-
ING/INSTALLING THE SEAT ASSEMBLY in
this procedure of the manual.
2. Remove the four (4) seat support collars.
Refer to
REMOVING/INSTALLING THE SEAT
SUPPORT COLLARS in this procedure of the
manual.
3. Perform one (1) of the following:
A. To position the seat assembly in the HIGH-
EST position, align the mounting hole in the
seat support collar with the MIDDLE mount-
ing hole in the seat support post.
B. To position the seat assembly in the MIDDLE
height position, align the mounting hole in
the seat support collar with the TOP mount-
ing hole in the seat support post.
C. To position the seat assembly in the LOW-
EST height position, a seat support collar is
NOT necessary. The welded seat support
of the seat assembly will rest on the seat
mounting support of the wheelchair frame.
4. Install one (1) nut and bolt through mounting
hole in the seat support collar and through
the mounting hole in the seat support post
determined in STEP 2. Securely tighten.
5. Repeat STEPS 2-5 for the three (3) remain-
ing seat support posts.
6. Reinstall the seat assembly. Refer to
REMOV-
ING/INSTALLING THE SEAT ASSEMBLY in
this procedure of the manual.
S
E
A
T
SEATPROCEDURE 5
Bend End
of Lock
AWAY
From
Retaining
Pin
DETAIL "A"
Retaining Pin
Seat Support Post
Seat Mounting
Support
Retaining Pin Lock
Retaining Pin
Swivel
Retaining
Pin
Lock