Filter
Top Products
SECTION 6—FRONT RIGGINGS
Formula™ Powered Seating 52 Part No 1122170
5. Connect power legrest connector to jumper cable (Detail “B” of FIGURE 6.22).
Removing the Power Elevating Legrests
1. Disconnect power legrest connector from jumper cable.
2. Push legrest release handle and swing legrest to the outside of the wheelchair.
3. Lift up on powered legrest and remove from wheelchair.
4. Repeat STEPS 1-3 for opposite power legrest.
FIGURE 6.22 Installing/Removing the Power Elevating Legrests
Calf Pad
Footplate
Legrest Release
Handle
Mounting
Hole
DETAIL “A”
DETAIL “B”
Jumper
Cable
Power
Legrest
Connector
Mounting Pin