Filter
Top Products
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1122170 19 Formula™ Powered Seating
❑ Make sure seating systems with the recline function have the retaining pin in place at
the top of each back cane.
❑ Make sure all systems, except Elevate Only, have the retaining pin in place at the back
of each seat rail.
❑ Make sure elevate systems drive with reduced speed when seat is in elevated position.
❑ Check that spreader bar mounting fasteners are tight.
❑ Check that back cane mounting fasteners and back mounting fasteners are tight.
Inspect/Adjust Weekly
❑ Inspect all fasteners.
❑ Inspect TRBKTS fasteners and hardware.
❑ Make sure all electrical connections are secure.
❑ Check that cables are routed and secured properly to ensure that cables DO NOT
become entangled and damaged during normal operation of seating system.
Inspect/Adjust Monthly
❑ Clean upholstery and armrests.
❑ Clean dirt and lint from axles.
❑ Clean dirt and lint from bearings.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Make sure drive lock-out operates properly.
❑ Make sure tilt operates smoothly and properly.
❑ Make sure recline operates smoothly and properly.
❑ Make sure elevate operates smoothly and properly.
❑ Make sure elevate systems drive with reduced speed when seat is in elevated position.
❑ Check that spreader bar mounting fasteners are tight.
❑ Check that back cane mounting fasteners and back mounting fasteners are tight.
Inspect/Adjust Periodically
❑ Inspect all fasteners.
❑ Inspect TRBKTS fasteners and hardware.
❑ Ensure clothing guards are secure.
❑ Arms are secure but easy to release and adjustment levers engage properly.
❑ Adjustable height arms operate and lock securely.