Filter
Top Products
SECTION 6—FRONT RIGGINGS
Part No 1122170 49 Formula™ Powered Seating
Before 2/15/07
NOTE: For this procedure, refer to FIGURE 6.19.
1. Loosen the footplate mounting screw
and move the footplate to the desired
angle.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the footplate mounting screw
to secure the footplate in the desired
position.
3. Repeat STEPS 1 and 2 for the other
footplate.
FIGURE 6.19 Adjusting the Footplate
Angle - Before 2/15/07
Adjusting the Tension of the Flip Up Footplate
NOTE: For this procedure, refer to FIGURE 6.20.
NOTE: This procedure applies to both power and manual center mount footrests.
NOTE: The tension can be adjusted to increase or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the footrest angle hinge to decrease the rotation effort.
NOTE: DO NOT remove the footplate mounting screw.
2. Tighten the footrest angle hinge mounting screw to increase the rotation effort.
3. Repeat STEPS 1 and 2 for the other footplate.
FIGURE 6.20 Adjusting the Tension of the Flip Up Footplate
Center Mount
Footrest
Footplate
Footplate Mounting
Screw
Footplate
Footrest Angle
Hinge Mounting
Screw
Footrest
Angle
Hinge
Center
Mount
Footrest