Support User Manuals

Invacare Force Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—OPTIONS

Recumbent Handcycle Series 70 Part No 1114850

3. Usingtheforkclampandtwosocketscrews,securethebottomoftheplatetothe

frame.

4. Whileinsertingthelowerthreadedpostintothetab,positionthedampenerclamp

aroundthehandcycleframe.

5. Usingtwosocketscrews,looselysecurethedampenerclamptothehandcycleframe.

6. Usingalocknut,securethesteeringdampenertothedampenerclamp.

7. Installthefrontwheel.RefertoInstallingtheFrontWheelonpage 71.

8. Ensuringthefrontwheelanddampenerclampareinlinewiththehandcycleframe,

securelytightenthetwosocketscrewssecuringthedampenerclamptothehandcycle

frame.

9. Testdrivehandcycle,ifhandcyclepullstotheleftorrightadjustthesteering

dampener.RefertoAdjustingSteeringDampener

onpage 52.

FIGURE 9.16 Removing/Installing the Fork - XLT Gold, and Top End Force Equipped with

Steering Dampener

Removing/Installing the Front Wheel - XLT Gold, XLT

Pro and XLT with Speed Cassette Chain

NOTE:Forthisprocedure,refertoFIGURE 9.17onpage71.

Removing the Front Wheel

1. Openthequick‐releaseleversecuringthefrontwheeltothefork(DetailʺAʺ).

2. Loosentheknobontheoppositesideofthequick‐releaselever.

3. Removethewheelfromthefork.

4. Removethechainfromthefrontwheel.

Dampener Clamp (Tab)

Lower Threaded Post of

Steering Dampener

Handcycle Frame

Dampener Clamp

Fork Clamp

Fork Clamp

Locknut

Socket Screws

Fork

previous next