Support User Manuals

Invacare Force Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—OPTIONS

Recumbent Handcycle Series 66 Part No 1114850

Installing Gloves

NOTE:Forthisprocedure,refertoFIGURE 9.12onpage66.

1. Wrappalmlooparoundhorizontalhandle(usingtopslotonly)andsecuretoglove.

2. Rungloveloopthroughbottomslotonpalmandoverbackofhanduntiltight.Secure

glovelooptobackofglove.

3. Reattachglovestripstobackofglove.

FIGURE 9.12 Installing Gloves

Mountain Drive Transmission Option

ƽ WARNING

DO NOT shift the mountain drive transmission option under load (i.e. using a high

gear to start the handcycle in motion or to climb a hill, etc.). Shifting the mountain

drive transmission option under load will damage the internal workings of the

mountain drive option and will void the warranty.

NOTE:Forthisprocedure,refertoFIGURE 9.13onpage66.

Switching to Mountain Drive Transmission Option

1. Performoneofthefollowing:

• SwitchingMountainDrive

TransmissionOptionOn‐Pushin

thegearshiftbuttoninthemiddle

oftherightsideofthehandcrank

whiletheoptionisundernoload.

• SwitchingMountainDrive

TransmissionOptionOff‐Pushthe

gearshiftbuttonontheleftsideof

the

handcrankinwhiletheoption

isundernoload.

FIGURE 9.13 Mountain Drive

Transmission Option

Mountain Drive Transmission Option Maintenance

Themountaindrivetransmissionoptionshouldbemaintainedbyaqualifiedtechnician

accordingtothemanufacturerʹsinstructionsincludedwiththehandcycle.

Glove

Glove

Strip

Top Slot

Palm

Loop

Palm Loop Secured to Glove

Horizontal Handle

Bottom Slot

Glove

Strip

Glove Loop

Gear Shift

Button

Hand

Crank

previous next