Support User Manuals

Invacare Force Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—OPTIONS

Part No 1114850 61 Recumbent Handcycle Series

Installing the Water Bottle

NOTE:Forthisprocedure,refertoFIGURE 9.2.

1. Securethewaterbottlemountingtubetotheseatframeusingthehardwareprovided.

NOTE:Makesurethatthewaterbottlemountingbracketmountingholesarefacingdownward.

2. Attachthewaterbottlemountingbrackettothemountingtubeusingthehardware

provided.

3. Pushwaterbottleintomountingbracketuntilsecure.

FIGURE 9.2 Installing the Water Bottle

Installing/Using the Tow Bar

NOTE:Forthisprocedure,refertoFIGURE 9.3.

NOTE:Thetowbarwillnotworkwithwheelchairswithswingawayfrontriggings.Onlyrigid

wheelchairswithatubularstylefootrestcanbetowedusingthetowbar.

1. Removethetwosetscrewsoneachmountingbracket.

2. Positionthemountingbracketsaroundthehandcyclerearframe.

NOTE:Makesurethatthetowbariscentered

onthehandcyclerearframe.

3. Usingtwosetscrewsforeach

mountingbracket,securethemounting

bracketstothehandcyclerearframe.

4. Securethetowbartothehandcycle

withthemountingbracketsandset

screws.

5. Securethewheelchairtothetowbar

withthefasteningstripsprovided.

FIGURE 9.3 Installing/Using the Tow Bar

Seat Frame

Mounting

Bracket

Water

Bottle

Mounting Tube

Tow Bar

Mounting

Bracket

Set Screws

Fastening Strip

Handcycle

Rear Frame

previous next