Filter
Top Products
SECTION 7—WHEELS
Recumbent Handcycle Series 44 Part No 1114850
Determining/Adjusting Toe In/Toe Out
NOTE:Forthisprocedure,refertoFIGURE 7.3.
Determining Toe In/Toe Out
1. Inflateallpneumatictirestorecommendedtirepressures(listedonthesidewallofthe
tire).
2. Measurethedistancebetweenthe
centerlinesattherearandfrontofthe
rearwheelsatapproximately12inches
fromtheground/floor.
NOTE:Foroptimumaccuracy,performSTEP
2withthehandcycleoccupied.
NOTE:Step2maybeperformedwithusing
alignmentgauge(availableasanoptionforthe
handcycle).RefertoUsingtheAlignment
Gaugeonpage 74.
3. Determinethedifferencebetw eenthe
twomeasurements.Ifthedifference
betweenthetw omeasurementsis
greaterthan1/8‐inch(formaximum
rollability),oneoftwoconditionsexists:
•Ifthebackcenterlinemeasurement
oftherearwheelsissmallerthan
thefrontcenterlinemeasurementof
therearwheels,atoe‐outcondition
exists.
•Ifthebackcenterlinemeasurement
oftherearwheelsisLARGERthan
thefrontcenterlinemeasurementof
therearwheels,atoe‐incondition
exists.
4. Ifthedifferencebetweenthe
measurementsisgreaterthan1/8‐inch,
correctthetoe‐in/toe‐outcondition.
RefertoAdjustingToeIn/ToeOut
on
page 45.
FIGURE 7.3 Determining/Adjusting Toe
In/Toe Out
Smaller Than
Front
Larger Than Front
Front of handcycle
Toe-out
Toe-in
Top View of
handcycle
DETAIL “A”
Clamp
Camber Bar
Socket Screw
Camber
Insert