Support User Manuals

Invacare Force Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—OPTIONS

Part No 1114850 65 Recumbent Handcycle Series

2. Firmlytightenthebolt.

NOTE:Handleshouldspinfreelywithminimalplay.Ifhandledoesnotspinfreelymakesur ethe

spacerisfirmlyinplace.Ifhandlestilldoesnotspinfreely,contactInvacare.

FIGURE 9.10 Installing V/S Crankarm Handles - For Models Made Before 7/12/07

For Models Made After 7/12/07

ƽ WARNING

Failure to install handle assembly

properly could result in injury.

It is recommended to inspect this

assembly prior to and after each use.

NOTE:Forthisprocedure,referto

FIGURE 9.11.

1. Securethehandletothecrankarm

housingusingthesetscrewand

locknut.

NOTE:Usetherighthandle,thehandlewitha

mountingpost,withtherightcrankarmand

leftwithleftcrankarm.Therightcrankarmhas

aflangeatthebaseofthecrankarm.Theleft

crankarmdoesnot.

2. Firmlytightenthelocknut.

NOTE:Handleshouldspinfreelywith

minimalplay.Ifhandledoesnotspinfreely,

contactInvacare.

FIGURE 9.11 Installing V/S Crankarm

Handles - For Models Made After 7/12/07

Crankarm

Handle

Bearing

Spacer

Bolt

Bearing

Crankarm

Housing

Crankarm

Handle

Locknut

Left

Crankarm

Flange

Right

Crankarm

DETAIL “A” - HANDLE

REPLACEMENT

Crankarm Housing

Set

Screw

DETAIL “B” - CRANKARM

ORIENTATION

Left

Handle

Right

Handle

Mounting

Post

previous next