Filter
Top Products
Part No. 1106628 9 Solara jr.
STABILITY - ALL MODELS EXCEPT RECLINERS
WARNING
To maintain maximum stability, position the rear wheels in the most rearward posi-
tion in the axle mounting plate. Moving the rear wheels to any of the other mounting
positions causes the wheelchair to decrease in stability.
If moving the rear wheels to ANY forward position, ensure the wheelchair is stable
BEFORE using.
ALWAYS ensure stability BEFORE using maximum amount of tilt-in-space or moving
the rear wheels forward. TEST wheelchair BEFORE it is occupied by the end user to
ensure safety.
STABILITY - ALL MODELS
STABILITY WARNING
The back height, seat depth, back angle, seating system, tilt angle, seat height, size/
position of the rear wheels, size/position of the front casters, as well as the user
condition directly relate to the stability of the wheelchair. Any change to one (1) or
any combination of the eleven (11) may cause the wheelchair to decrease in stability.
These adjustments MUST be performed by a qualified technician.
ALWAYS make sure that the wheelchair is stable BEFORE using the tilt-in-space.
Back Height
Seat Depth
Back Angle
Seating System
Tilt Angle
Caster Size
Caster Position
Wheel Size
Wheel Position
User Condition
Wheel Locks
Anti-Tippers
Locking Collar
NOTE: When changes to the left hand column occur, follow across the chart and refer to the ü
procedure to maintain the proper stability, safety and handling of the wheelchair.
Back Height üüüüüüüüN/A N/A N/A N/A
Seat Depth ü üüN/A üüüüN/A N/A N/A ü
Back Angle üü üüüüüüN/A N/A N/A ü
Seating System üüü üüüüüüN/A N/A N/A
Tilt Angle N/A N/A ü N/A N/A N/A N/A N/A N/A N/A N/A ü
Caster Size ü N/A ü N/A N/A üüüN/A üüü
Caster Position ü N/A ü N/A N/A ü üüN/A üüü
Wheel Size ü N/A ü N/A N/A üü ü N/A üüü
Wheel Position ü N/A ü N/A N/A üüü N/A üüü
User Condition üüüüüüüüü N/A N/A N/A
Seat Height ü N/A üüüüüüüN/A üüü
PROCEDURE 1GENERAL GUIDELINES
GENERAL GUIDELINES