Filter
Top Products
Part No. 1106628 33 Solara jr.
INSTALLING/REPLACING CHEST POSITIONING STRAPS
(FIGURE 12)
INSTALLING
1. Position the chest positioning strap to one (1) of the holes on the back cane.
NOTE: The standard recommended position for the chest positioning strap is in the top hole of the back cane, but
may be mounted according to the user's needs.
2. Secure the chest positioning strap to the back canes with the NEW/EXISTING hex screw
and locknut as shown in FIGURE 9.
3. Repeat STEPS 1-2 for opposite side.
REPLACING
1. Remove the hex screw that secures the chest positioning strap to the back cane.
2. Discard EXISTING chest positioning strap.
3. Repeat STEPS 1-2 for opposite side, if necessary.
4. Install the NEW chest positioning strap. Refer to
INSTALLING CHEST POSITIONING
STRAPS in this procedure of the manual.
Hex Screw
Chest Positioning Strap
Back Cane
Locknut
FIGURE 12 - INSTALLING/ REPLACING CHEST POSITIONING STRAP
P
O
S
I
T
I
O
N
I
N
G
S
T
R
A
P
S
PROCEDURE 5ARMS/POSITIONING STRAPS
ARMS/POSITIONING STRAPS