Filter
Top Products
Part No. 1106628 17 Solara jr.
SAFETY INSPECTION PROCEDURE 2
SAFETY INSPECTION CHECKLIST
NOTE: Every six (6) months take your wheelchair to a qualified technician for a thorough inspection and
servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your
wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other vehicle.
Routine maintenance will extend the life and efficiency of your wheelchair.
Initial adjustments should be made to suit personal body structure and preference. Thereafter
follow these maintenance procedures:
This Procedure Includes the Following:
Safety Inspection Checklist
Troubleshooting Maintenance
SAFETY INSPECTION
ITEM Initially Weekly Monthly Periodically
GENERAL
Wheelchair rolls straight
(no excessive drag or pull to one side). X X
CLOTHING GUARDS
Inspect for bent or protruding metal. X X
Ensure all fasteners are secure. X X
ARMS - PROCEDURE 5
Secure but easy to release. X X
ARMREST - PROCEDURE 5
Inspect for rips in upholstery. X X
Base sits flush against arm tube. X X
TRIGGER RELEASE LEVER AND CABLE
- PROCEDURE 9
Cables completely release and handles return
when released. X X
REAR WHEELS - PROCEDURE 7
Sealed bearings and axle nut tension correct. X X
No excessive side movement/binding when
lifted from ground and spun. X X
HANDRIMS
Inspect for signs of rough edges or peeling finish. X X
FRONT CASTERS/FORKS - PROCEDURE 7
Inspect axle for proper tension by spinning
caster; caster should come to a gradual stop. X X
Adjust bearing system if wheel wobbles
noticeably or binds to stop. X X
Inspect fork and stem for damaged,
loose or missing hardware. X
Inspect casters for cracks and wear X X
CAUTION: As with any vehicle, the wheels,
casters and tires should be checked periodically
for cracks and wear, and should be replaced.
TIRES - PROCEDURE 7
Inspect for flat spots and wear. X X
If pneumatic tires, check for proper inflation. X X
Inspect rear tires for cracks and wear X X
CAUTION: As with any vehicle, the wheels,
casters and tires should be checked periodically
for cracks and wear, and should be replaced.
WHEEL LOCKS - PROCEDURE 8
Wheel locks do not interfere with tires when rolling. X X
Wheel locks easy to engage. X X
Pivot points free of wear or looseness. X X
CLEANING
Clean and wax all parts. X
Clean upholstery and armrests. X
Inspect axles are free from dirt, lint, etc. X
Inspect tilt slides and roller bearings are free
from dirt, lint, etc. X