Filter
Top Products
Solara jr. 30 Part No. 1106628
ARMS/POSITIONING STRAPS
ARMS/POSITIONING STRAPSPROCEDURE 5
ADJUSTING T-ARM WIDTH (FIGURE 7)
1. Remove the two (2) phillips screws that secure the arm pad to the arm tube.
2. Turn the arm pad around and reposition the arm pad on the arm tube.
3. Re-secure the arm pad to the arm tube with the two (2) phillips screws. Tighten securely.
4. Repeat for the opposite side, if necessary.
FIGURE 6 - ADJUSTING T-ARM HEIGHT
FIGURE 7 - ADJUSTING T-ARM WIDTH
Phillips Screw
Arm Tube
Phillips Screw
Arm Pad
Socket
Screws
Arm Pad
Phillips Screw
T-Arm Post
Arm Tube
NOTE: If
necessary,
turn arm
tube 180
°
to obtain
two (2)
positions.
Phillips Screw
FIGURE 8 - ADJUSTING T-ARM
DEPTH
ADJUSTING T-ARM DEPTH (FIGURE 8)
1. Remove the two (2) phillips screws that
secure the arm pad to the arm tube.
2. Remove the two (2) socket screws that
secure the arm tube to the T-arm post.
3. Reposition the arm tube on the T-arm
post:
A. Desk Length Arms - to one (1) of
three (3) positions depending on the
desired arm pad depth.
B. Full Length Arms - to one (1) of
five (5) positions depending on the
desired arm pad depth.
NOTE: Additional positions are obtainable by turn-
ing the arm tube 180
°
.
Set
Screws
T-Arm Release Lever - Unlocked Position
Outside T- Arm Post
T-Arm Release Lever
- Locked Position
Inside T-Arm
Post