Filter
Top Products
Part No. 1106628 53 Solara jr.
FIGURE 7 - ADJUSTING THE BACK HEIGHT - RECLINER MODELS ONLY
ADJUSTING THE BACK HEIGHT - RECLINER MODELS
ONLY (FIGURE 7)
1. If necessary, remove the rear wheels. Refer to REMOVING/INSTALLING THE REAR
WHEELS in PROCEDURE 7 of this manual.
2. Remove the two (2) mounting screws and locknuts that secure the seat adjustment plates
to the seat rail. Repeat for opposite side.
3. Refer to FIGURE 7 to determine the seat adjustment plate mounting position for the
corresponding seat cushion height.
4. Position the seat adjustment plates on the seat rails at the position determined in STEP 3.
5 Secure the seat adjustment plates to the seat rail with the two (2) existing mounting
screws. Repeat for opposite side.
6. Securely tighten mounting screws.
7. If necessary, reinstall the rear wheels. Refer to
REMOVING/INSTALLING THE REAR
WHEELS in PROCEDURE 7 of this manual.
2-inch Seat
Cushion Position
3-inch Seat
Cushion Position
Locknuts
Washers
Mounting
Screws
TILT/RECLINE PROCEDURE 9
TILT/RECLINE