Hardware Installation
2−20 CM 4000 Installation and Operating Manual
Double−Y Cable
Please refer to Figure 2−23.
A Cat5 factory cable kit is available in two versions: If the SCB is the old style (071 0884 xx series), order kit 174 8216 xx.
If the SCB is the new style (071 1000 xx series), order kit 174 8217 xx. The factory cable must be used with a customer−sup-
plied adapter, wired as shown in Figure 2−21 on page 2−18. Note that the cables in this kit are eight inches long. Further
instructions are provided with the cable kit.
The rack mount BOP 4000 Break Out Panel / cable kit is available for making Y connections to redundant CMs. For more
information, see page 2−8 and following.
Figure 2−23. Factory−supplied
Encore/Jupiter serial cables
and customer−supplied items
RJ45 female to 9−pin D male adapter. In-
ternal wiring is per Figure 2−21.
8−inch cables supplied with Encore Y Cable
Kit. (Type depends on SCB model; refer to
text for ordering information.)
To SCB RS−422 ports
Customer−supplied items
Standard Cat5 cable (max. 250 feet)
RJ45 Y connector
8 inches
(203 mm)
F
M
M
8 inches
(203 mm)
8−inch cables supplied with BOP
4000 Break Out Panel
To CM RS−422 port
To CM
RS−422
port
BOP 4000 Break Out Panel
