Hardware Installation
2−82 CM 4000 Installation and Operating Manual
Note 1: When controlled by Jupiter or Saturn, SlimLine units display green characters, red tally indicators, and
one tally level only. With the Universal Display, only the triple display mode is supported (i.e., 3 segments of 8
characters each, plus tally indicators).
Note 2: Because the Cat 5 Ethernet cable connecting the controller to the UMDs carries power, the maximum rec-
ommended length is 15 m (50 ft). This is a standard (pin−for−pin) Ethernet cable, not a crossover cable.
Note 3: The RP 1/2/3 and RP 1/2/3 C series UMDs (which are no longer available) are installed and configured
similarly to the SlimLine series. The main difference is that the RP 1/2/3 units are daisy−chained directly to a CM
4000 serial port.
Note 4: For information about TSL UMDs, see Appendix S.
Note 5: For information about Grass Valley 8964 OMD On Screen Displays, see Appendix T.
