Software Control Panel Suite
7−5CM 4000 Installation and Operating Manual
MACHINE CONTROL TABLE
Machine Control
1
Dev Name
PC1MC1
Dev Type
MC−3000
Board
PC1
Port
1
Address
01010101
Group
I/O
Asoc Name
Preroll
MC−3000 Out
2 PC1MC2 MC−3000 PC1 1 23232323MC−3000 Out
3 PC1MC3 MC−3000 PC1 1 45454545MC−3000 Out
4 PC1MC4 MC−3000 PC1 1 67676767MC−3000 Out
5 PC1MC5 MC−3000 PC1 1 89898989MC−3000 Out
6 PC1MC6 MC−3000 PC1 1 90909090MC−3000 Out
Figure 7−4.
Dev Name
Enter the Device Name for each of the six Slaved Machine Control panels. These must agree
with the names entered on the MPK devices table.
Dev Type
Select “MC−3000.”
Board
Enter the Name of the PC that will display these panels. This must agree with the PC’s Board
Name entered on the Network Description table (page 7−1).
Port Address
To satisfy the compiler, there must be a unique entry in these fields and this entry must
agree with the corresponding entry on the MPK table. In this example, “PC1MC1” has the Address
“01010101” on both tables.
I/O
Select “Out.”
For information about management of Configuration Sets, including compiling and activating sets, see page 5−8.
