A SERVICE OF

logo

Open as PDF
next previous
Configurator
CP Output Set
5−91CM 4000 Installation and Operating Manual
A split panel can also be configured with a different number of inputs and outputs (“unbalanced split”), but such
panels cannot be expanded. In this application, the number of outputs can be from 1 to 15 (CP 3832) or 1 to 31
(CP 3864). Buttons not assigned to outputs are available for inputs. For example, if two buttons are used for out-
puts, then 30 buttons will be available for inputs on a CP 3832 panel. See Figures 5−73 and 5−74.
Output
button 1
CP−3832
Output
button 2
IN
OUT
†
†
Figure 5−73. Entries for CP 3832 configured as 30 x 2 “unbalanced split” panel.
1
Output Set — 3832−OUT
default 1 MONITOR1 MON1
2 default 2 MONITOR2 MON2
Category Entry Mnemnonic
Output
Lev Set Button
Logical
Output
button 1
CP−3864
Output
button 10
IN
OUT
†
†
†
Figure 5−74. Entries for CP 3864 configured as 54 x 10 “unbalanced split” panel.
1
Output Set — 3832−OUT
default 1 MONITOR1 MON1
2 default 2 MONITOR2 MON2
10 default 10 VTR−12 VT12
Category Entry Mnemnonic
Output
Lev Set Button
Logical