Filter
Top Products
AD-4405 Weighing Indicator Page 63
16.3.4. Commands for the Hold Function
Start Averaging to Hold
Start Averaging to HoldStart Averaging to Hold
Start Averaging to Hold
Starts averaging to hold. The reply differs with the conditions.
Template HS
Command
Reply Averaging start
Averaging now
Held
Release the Hold Data
Release the Hold DataRelease the Hold Data
Release the Hold Data
Releases the hold data or stop averaging and goes to the normal weighing mode.
Template HC
Command
Reply
Request
Request Request
Request the
the the
the Hold Status
Hold StatusHold Status
Hold Status
When receiving this command, the average/hold state is returned immediately.
Template HD
Command
Reply Not hold nor averaging
Averaging now
Held
16.3.5. Commands to Set the Data Output/ Print Format (UFC)
Set Serial Data Format
Set Serial Data FormatSet Serial Data Format
Set Serial Data Format
Sets the serial output data format.
Format 1 (2) data is stored in the same memory area of F34 (F35).
Template SFf, [ parameters ]
f: Format number, 1 or 2
Command
Reply
Set Print Format
Set Print FormatSet Print Format
Set Print Format
Sets the print out data format.
Format 1 (2) data is stored in the same memory area of F70 (F71).
Template PFf, [ parameters ]
f: Format number, 1 or 2
Command
Reply
S
H
S
H
D
H
1
,
D
H
2
,
D H
D H 1 ,
D H 2 ,
D H 0 ,
C
H
C
H
F
S
1
$
,
R
G
F S 1
$
, RG
F
P
1
$
,
R
G
F
P
1
$
,
R
G
16.3. Command Format