Filter
Top Products
AD-4405 Weighing Indicator Page 47
ENTER key..............The key to register the unit weight and return to the piece
count display. The unit weight is calculated automatically
with the weight and the number of samples.
Press the ESC key while pressing +/- key
The key to return to the piece count display without changing
the unit weight.
Notes It is preferable to have a large number of samples, to minimize the
counting error.
Press the ENTER key after the STABLE mark turns on.
If the total weight of the samples is too light and is not adequate to be
used as the unit weight,
loUt
loUtloUt
loUt
is displayed for 2 seconds and returns
to the registration display.
Digital input
When the unit weight is already known, digital input is available.
Step 1 Start with the normal weight mode.
Step 2 Press the SAMPLE key to enter the digital input of the unit the weight. U xxx and
the weight unit is displayed with unit pcs
pcspcs
pcs blinking. Using following keys:
0 - 9 key..................The key to set the unit weight. Maximum is 5 digits.
+/- key.....................The key to select the weighing unit of the unit weight.
ZERO key................The key to clear the digital input. U---- is displayed.
ESC key ..................The key to return to the normal weight display without
changing the registered unit weight.
ENTER key..............The key to register the unit weight and return to the normal
weight display.
Press the MODE key while pressing the +/- key The key to shift the decimal point.
12. Counting Function