Call Functions 34
In Idle mode, you can also adjust the ringer volume using these
same keys.
In-Call Options
During an active call there are several functions available by
touching a corresponding onscreen button.
•
Speaker On/Off
routes the phone’s audio through either the speaker or
through the earpiece.
–
Slide
Speaker
to
On
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.)
–
Slide
Speaker
to
Off
to use the phone’s earpiece.
•
Mute/Unmute
turn the onboard microphone either on or off.
–
Touch
Mute
during a call to mute the microphone.
–
Touch
Unmute
to unmute the microphone.
•
Dial
to display the onscreen keypad, where you can choose to Save the
entered number to Contacts, Send a new text message, or initiate a new
call.
•
Hold
to place the current active call on hold.
•
More
to access additional in-call options such as:
–
Contacts
to display your current Contact entries.
–
Save to Contacts
to store the current phone number into your Contacts.
–
Send Message
to send a new text message.
–
Memo
to write a memo concerning this call.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
1. While on a call, touch Hold. This action places the current
caller on hold (which is displayed onscreen as a
greyed-out box).
2. You can later reactivate this call by touching Resume.
To make a new call while you have a call in progress:
1. Touch .
2. Touch ➔
Contacts
to look up a number in the
Contacts.
- or -
Touch ➔ enter the new number ➔ .
3. Press to dial the second number.
Once connected, each call is displayed within either an
In
call
or
On hold
tab.
Note:
The caller currently on hold appears within the
On Hold
tab.
Hold
More
Dial
New Call
a885.book Page 34 Tuesday, November 3, 2009 1:39 PM
