A SERVICE OF

logo

Open as PDF
next previous
General Description 2-5
Physical Description
Figure 2-4 AC Power Supply Assembly Front View
Card Shelf Configuration
There are fifteen vertical slots in the front of the BPX switch enclosure to hold plug-in cards (see
Figure 2-5). The middle two slots, slots number 7 and number 8, are used for the primary and
secondary Broadband Controller Cards (BCC). The right-most slot, number 15, is used to hold the
single Alarm/Status Monitor Card. The other twelve slots, number 1 through number 6 and number
8 through number 14, can be used for the Network Interface and Service Interface cards.
DC
AC
Indicator
LEDS
H8145