A SERVICE OF

logo

7-18 Cisco BPX 8600 Series Reference
ATM Connection Configuration
Figure 7-6 ABR Standard Connection Prompt Sequence
ABRSTD
PCR(0+1)
%Util
MCR
CDVT(0+1)
FBTC (Frame based traffic control - AAL5, enable/disable)
VSVD (enable/disable)
10226
Disabled
(ABR std without VSVD)
Enabled
(ABR std with VSVD)
Set policing = 4
ABR Standard without
VSVD means without VSVD
congestion flow control.
ABR Standard without
VSVD is supported for BXM,
ASI T3/E3, and ASI OC3.
FCES (Flow Control External Segment,
enable/disable)
DEFAULT EXTENDED PARAMETERS
(enable/disable)
Disabled
(Configure
following
parameters)
Enabled
SCR
MBS
Policing (1, 2, 3, 4, or 5)
VC QDepth
CLP Hi
CLP Lo/EPD
EFCI
ICR
ADTF (same as ICR TO)
Trm (same as Min. Adjust)
RIF (same as Rate up)
RDF (same as Rate down)
Nrm
FRTT
TBE
Default values used
for: SCR, MBS, etc.
For policing prompt:
1 = VBR.1
2 = VBR.2
3 = VBR.3
4 = PCR policing only
5 = policing off
Note: Bandwidth allocation
= MCR * %Util
1
1
Trunk cell routing
restrict (Y/N) [Y]
Trunk cell routing
restrict (Y/N) [Y]
Trunk cell routing
restrict (Y/N) [Y]