A SERVICE OF

logo

12-16 Cisco BPX 8600 Series Reference
Management
User Commands
The following user commands are associated with virtual circuit feature changes:
addcon
addcongrp
cnfcon
cnfatmcls
delcon
delcongrp
dspatmcls
dspcongrps
grpcon
AUser Commands
The following user commands are modified to support ASI-1 E3:
cnfln
cnflnstats
dspcd
dspcds
dsplncnf
dsplns
dsplnstatcnf
dsplnstathist
dspyred
prtyred
Management
Connection Management
Interworking connections may be added from either the BPX switch, the IPX switch, the IGX
switch, or the MGX 8220. Intra- and inter-domain interworking connections are supported.
Connection configuration parameters are endpoint-specific. Thus, the ATM-only parameters are
only configurable on the BPX switch end. The IPX switch does not know about these parameters, so
they cannot be configured or displayed at the IPX switch end. Parameter units are endpoint-specific
also. Units on the BPX switch are cells per second, units on the IPX switch are bits per second.
Bundled interworking connections are not supported.
Virtual path interworking connections are not supported.