9-48 Cisco BPX 8600 Series Reference
dspcds
In the preceding messages, an asterisk (*) means an additional status designation for BCC, NPC, or
NPM cards. “F” flag in the card status indicates that a non-terminal failure was detected. Cards with
an “F” status are activated only when necessary (for example, when no other card of that type is
available). Cards with a “Failed” status are never activated.
Example
Sample Display:
n4 TN SuperUser BPX 15 9.1 Apr. 4 1998 16:40 PST
FrontCard BackCard FrontCard BackCard
Type Rev Type Rev Status Type Rev Type Rev Status
1 Empty 9 ASI-155 BE02 MMF-2 AB Standby
2 BXM-155 BB16 MM-8 BA Active 10 BME-622 KDJ MM-2 FH Active
3 Empty 11 BXM-E3 BB16 TE3-12P04 Active
4 BNI-E3 CE08 E3-3 JY Active 12 BXM-155 BB16 MM-8 BA Active
5 BNI-E3 CE08 E3-3 EY Active 13 BXM-155 AC30 SM-4 P05 Active
6 BNI-T3 CF08 T3-3 FH Active 14 Empty
7 BCC-3 DJL LM-2 AA Active 15 ASM ACB LMASM P01 Active
8 BCC-3 DJL LM-2 AA Standby
Last Command: dspcds
Next Command:
• Standby—T Card idle, background test in progress.
• Standby—F-T Card idle, failure(s) detected, background test in progress.
• Failed Card failed.
• Down Card downed by user.
• Down—F Card downed, failure(s) detected.
• Down—T Card downed, failure(s) detected, background test in progress.
• Mismatch Mismatch between front card and back card.
• Update * Configuration RAM being updated from active control card.
• Locked* Incompatible version of old software is being maintained in case it is
needed.
• Dnlding* Downloading new system software from the active BCC (BPX switch),
or NPC (IPX switch or IGX switch), adjacent node, or from StrataView
Plus.
• Dnldr* Looking to adjacent nodes or StrataView Plus for either software to load
or other software needs you have not specifically requested.
