9-34 Cisco BPX 8600 Series Reference
cnfqbin
cnfqbin
Tag switched VC connections are grouped into large buffers called Qbins. This command configures
the Qbins. For the EFT release of tag switching, Qbin 10 is used for tagged switch connections.
Syntax
cnfqbin <slot.port> <Qbin_#> <e/d> <BWmin> <discard_thr> <CLPlo> <CLPhi> <EFCI_thr>
Example
cnfqbin 13.4 10 E 0 65536 6095 80100 40
Attributes
Related Commands
dspqbin
Parameters-cnfqbin
Privilege Jobs Log Node Lock
BPX switch
Parameter Description
slot.port slot.port
Specifies the slot and port number for the BXM
Qbin number Specifies the number of the Qbin to be configured
e/d Enables or disables the Qbin.
Minimum bandwidth Bandwidth allocated to the VCs
Qbin discard threshold
Low CLP threshold Specifies a percentage of the Qbin depth such that, when the Qbin level falls below
this level, the node stops discarding CLP=1 cells.
High CLP threshold Specifies a percentage of the Qbin depth. When the threshold is exceeded, the node
discards cells with CLP=1 in the connection until the Qbin level falls below the
depth specified by CLP Lo.
EFCI threshold Explicit Forward Congestion Indication.The percentage of Qbin depth that causes
EFCI to be set.
