6-32 Cisco BPX 8600 Series Reference
Command Line Interface Examples
An example of the cnftrk command for trunk 4.1 of a BXM card follows:
pubsbpx1 TN SuperUser BPX 15 9.1 Jan. 11 1998 18:50 GMT
TRK 4.1 Config OC3 [353207cps] BXM slot: 4
Transmit Rate: 353208 Restrict CC traffic: No
Subrate interface: -- Link type: Terrestrial
Subrate data rate: -- Line framing: STS-3C
Line DS-0 map: -- coding: --
Pass sync: Yes CRC: --
Loop clock: No recv impedance: --
Statistical Reserve: 1000 cps cable type: --
Idle code: 7F hex length: --
Max Channels/Port: 256 HCS Masking: Yes
Connection Channels: 256 Payload Scramble: Yes
Valid Traffic Classes: Frame Scramble: Yes
V,TS,NTS,FR,FST,CBR,VBR,ABR Virtual Trunk Type: --
SVC Channels: -- Virtual Trunk VPI: --
SVC Bandwidth: -- cps Deroute delay time: 0
This Command: cnftrk 4.1
Transmit Rate [T2=14490, E3=80000, T3=96000, OC3 = 353208, OC12=1412830](353208)
An example of the addtrk command follows:
pubsbpx1 TN SuperUser BPX 15 9.1 Jan. 11 1998 18:54 GMT
TRK Type Current Line Alarm Status Other End
1.1 T3 Clear - OK pubsaxi1(AXIS)
1.3 T3 Clear - OK pubsipx1/8
4.1 OC3 Clear - OK -
Last Command: dsptrks
Next Command: addtrk 4.1
