6-28 Cisco BPX 8600 Series Reference
User Commands
User Commands
This section provides a preliminary summary of configuration, provisioning, and monitoring
commands associated with the BXM cards. These commands apply to initial card configuration, line
and trunk configuration and provisioning, and connection configuration and provisioning.
New or modified commands include but are not limited to:
Connection Provisioning
•
addcon-add connection
• cnfcon-configure connection
• dspcon-display connection
Diagnostics
• addlnloclp-add local loopback to line
• addlnlocrmtlp-add local remote loopback to line
• dellnlp-delete local or remote loopback
Te s t
• tstconseg-test connection externally with OAM segment loopback cells
• tstdelay-test connection round trip delay
Statistics
• Line and Trunk statistics
—cnflnstats-configure line statistics collection
— dsplnstatcnf-display statistics enabled for a line
— dsplnstathist-display statistics data for a line
— cnftrkstats-configure trunk statistics collection
— dsptrkstatcnf-display statistics enabled for a trunk
— dsptrkstathist-display statistics data for a trunk
• Channel Statistics
—cnfchstats-configure channel statistics collection
— dspchstatcnf-display statistics configuration for a channel
— dspchstathist-display statistics data for a channel
— dspchstats-display channel statistics (multisession permitted)
• Line Statistics
—cnfslotalm-configure slot alarm threshold
—dspslotalms-display slot alarms
