Filter
Top Products
Special Tests
74
Firmly insert the test strip all the way into the
test strip holder until it stops (the
confirmation dot should be facing down).
◆
IMPORTANT
If you fail to completely insert the test strip,
the test may start; however, you may receive an
inaccurate, low result.
◆
IMPORTANT
You have up to 2 minutes to insert the test
strip after the solution is applied. If you insert
the test strip after 2 minutes, you may get an
inaccurate result or an error message. Discard
the test strip and repeat the test with a new test
strip.
The test result appears in
approximately 30 seconds.
◆
IMPORTANT
Do not remove the test strip
until the countdown is
complete.
8
Unkn A Result
mg/dL
Menu
Enter
Notes
Ok
BU.book Page 74 Monday, October 28, 2002 11:14 PM