Filter
Top Products
25
◆
IMPORTANT
Do not remove the test strip until the
countdown is complete.
• If the result is PASSED,
press Ok, remove the strip,
and continue with the
remaining required control
levels.
Or, if you wish to record
additional information
with the test result, press
Enter Notes and choose
1 to 3 comments from the
list. Press Ok and remove
the test strip.
Depending on the configuration option setting,
the QC result will be displayed as either a
numeric value or Passed/Failed.
BU.book Page 25 Monday, October 28, 2002 11:14 PM