Filter
Top Products
31
Enter your operator ID either
by pressing the touch screen
or using the barcode scanner.
Refer to page 8 for
information on scanning a
barcode.
Enter the patient’s ID, either
by pressing the touch screen
or using the barcode scanner.
■
NOTE
Carefully enter the ID. An
accurate patient ID is
imperative for transferring
the correct results to the
medical record.
Depending on the configuration option setting,
you may or may not be required to enter your
operator ID.
If your operator ID is required, a configuration
option may be set to remember your ID for up to
1 hour after the bedside unit is turned off. If
your ID appears at the operator ID screen, press
Ok to confirm it is correct. If the ID is not
correct, simply enter your ID and it will replace
the existing ID.
4
5
BU.book Page 31 Monday, October 28, 2002 11:14 PM