Filter
Top Products
Quality Control Test
24
◆
IMPORTANT
If you fail to completely insert the test strip,
the test may start; however, you may receive an
out-of-range result.
◆
IMPORTANT
You have up to 2 minutes to insert the test
strip after the control solution is applied. If
you insert the test strip after 2 minutes, you
may get an out-of-range result or an error
message. Discard the test strip and repeat the
test with a new test strip.
The QC test result appears in approximately
30 seconds. The time may vary depending on
the temperature and glucose level.
10
BU.book Page 24 Monday, October 28, 2002 11:14 PM