Filter
Top Products
SECTION 10—OPTIONS
Part No. 1100869 53 9000 Topaz™Wheelchair
One Piece Footboard Height Adjustment
NOTE: For this procedure, refer to FIGURE 10.11.
1. Remove the footboard support assembly. Refer to Installing/Removing One-Piece
Footboard on page 51.
NOTE: Lay the assembly on a flat surface to simplify this procedure.
2. Remove the two (2) bolts and locknuts that secure the lower footboard support tube
to the upper footboard support.
3. Reposition the lower footboard support tube to the desired height.
4. Using the two (2) bolts and locknuts, secure the lower footboard support tube to the
upper footboard support. Securely tighten.
NOTE: Ensure both footboard supports are adjusted to the same height.
5. Repeat STEPS 2-4 to adjust the remaining footboard support assembly.
6. Reinstall the footboard support assembly. Refer to Installing/Removing One-Piece
Footboard on page 51.
FIGURE 10.11 One Piece Footboard Height Adjustment
Upper
Footboard
Supports
Bolts
Locknuts
Lower
Footboard
tube
Footboard
Lower
Footboard
Tube
Locknuts