Filter
Top Products
SECTION 10—OPTIONS
Part No. 1100869 47 9000 Topaz™Wheelchair
Installing/Removing Solid Back Insert
NOTE: For this procedure, refer to
FIGURE 10.5.
Installing
1. Position the solid back insert between
the back canes.
2. Wrap the two (2) fastening straps
around the back canes.
3. Securely fasten with two (2) snaps.
Removing
1. Release the two (2) snaps securing the
two (2) fastening straps around the
back canes.
2. Remove the solid back insert.
FIGURE 10.5 Installing/Removing Solid
Back Insert
Installing O
2
Holder/Telescoping I.V. Rod with O
2
Holder
NOTE: For this procedure, refer to FIGURE 10.6.
1. Slide the mounting bracket over the left side step tube of the wheelchair frame.
2. Secure the mounting bracket to the wheelchair frame with the hex screw, spacer and
locknut.
3. Telescoping I.V. with O
2
holder only: Secure the top of the telescoping I.V. rod holder
to the wheelchair frame with a tie wrap.
Back Canes
Solid Back Insert
Fastening Strap
Snaps