Filter
Top Products
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Part No. 1100869 23 9000 Topaz™Wheelchair
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Inspect tires for flat spots and wear.
❑ Inspect rear wheels for cracked, broken or loose spokes.
❑ Ensure all spokes are uniformly tight.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
Inspect/Adjust Monthly
❑ Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect cane hand grips for wear/looseness/deterioration.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
Inspect/Adjust Periodically
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect frame and crossbraces for loose or missing hardware.
❑ Inspect for bent frame or crossbraces.
❑ Check that wheel locks are easy to engage.
❑ Ensure that casters are free of debris.
❑ Inspect seat and backs for rips and sagging.
❑ Inspect seat for damaged or missing warning label.