Filter
Top Products
SECTION 6—SEAT AND BACK
Part No. 1100869 33 9000 Topaz™Wheelchair
SECTION 6—SEAT AND BACK
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Replacing Seat Upholstery
NOTE: For this procedure, refer to FIGURE 6.1.
1. Remove the mounting screws that secure the existing seat upholstery to the
wheelchair frame.
2. Remove the existing seat upholstery from the wheelchair frame.
3. Install new seat upholstery by reversing STEPS 1-2.
NOTE: The seat upholstery MUST be installed with the warning label facing up.
NOTE: The following chart determines the number of mounting screws for each seat depth.
FIGURE 6.1 Replacing Seat Upholstery
SEAT DEPTH NUMBER OF SCREWS
18 inch
20 inch
16
18
Mounting
Screws
Washers
Seat
Upholstery
Wheelchair
Frame
Warning
Label