Filter
Top Products
SECTION 4—FRONT RIGGINGS
Part No. 1100869 29 9000 Topaz™Wheelchair
Installing Calf Strap
NOTE: For this procedure, refer to FIGURE 4.6.
1. Remove calf strap from packaged container if it is not already secured to the footrest.
2. Secure one side of the calf strap around each footrest.
FIGURE 4.6 Installing Calf Strap
Heel Loop Replacement
NOTE: For this procedure, refer to FIGURE 4.7
1. Remove the two (2) bolts and locknuts that secure the lower footrest assembly to the
upper footrest support.
2. Remove the lower footrest assembly.
3. Remove the mounting screw, spacer and locknut that secure the existing heel loop to
the footrest.
4. Slide existing heel loop over the slide tube of the lower footrest assembly.
5. Install new heel loop.
6. Reverse STEPS 1-4 to reassemble.
NOTE: When securing the heel loop to the footrest assembly, tighten the mounting screw and
locknut until the spacer is secure.
FIGURE 4.7 Heel Loop Replacement
Footrest
Calf Strap
Footrest
Locknuts
Mounting
Screw
Spacer
Lower
Footrest
Assembly
Slide Tube
Heel Loop
Bolts
Locknut