Invacare 9000 Topaz Mobility Aid User Manual


 
SECTION 5—ARMS
9000 Topaz™Wheelchair 30 Part No. 1100869
SECTION 5—ARMS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may result.
Adjusting Armrest Height
ƽ WARNING
Make sure the height adjustment lever is in the locked position before using the
wheelchair.
NOTE: For this procedure, refer to FIGURE 5.1.
1. Unlock the armrest by performing the following:
A. Flip the height adjustment lever on the front of the armrest to the up (horizontal)
position.
B. Pull the height adjustment lock knob on the rear of the armrest and twist 1/4-turn
into the unlocked position.
2. Adjust armrest to one (1) of five (5) positions.
NOTE: The height adjustment lever and lock knob MUST be in the unlocked position when
placing armrest into the arm assembly.
3. Lock the armrest by performing the following:
A. Flip the height adjustment lever on the front of the armrest to the down (vertical)
position.
B. Pull the height adjustment lock knob on the rear of the armrest and twist 1/4-turn
into the locked position.
4. Repeat STEPS 1-3 for other armrest.