Filter
Top Products
SECTION 4—FRONT RIGGINGS
Part No. 1100869 25 9000 Topaz™Wheelchair
SECTION 4—FRONT RIGGINGS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may result.
Installing/Removing Swingaway Footrest Assembly
NOTE: For this procedure, refer to FIGURE 4.1.
Installing
1. Turn the swingaway footrest assembly to the side (open footplate is perpendicular to
wheelchair).
2. Install the hinge plates on the swingaway footrest assembly onto the hinge pins on the
wheelchair frame.
3. Push the swingaway footrest assembly toward the inside of the wheelchair until it
locks into place.
4. Repeat STEPS 1-3 for the other footrest
assembly.
NOTE: The footplates will be facing each other
when locked in place.
Removing
1. Push the footrest release lever inward
2. Rotate swingaway footrest assembly
outward.
3. Lift the swingaway footrest assembly
off the hinge pins.
4. Repeat STEPS 1-3 for the other side.
FIGURE 4.1 Installing/Removing Swingaway
Footrest Assembly
Footrest
Release Lever
Hinge
Pins
Swingaway
Footrest
Assembly
Hinge
Plates
Footplate