Filter
Top Products
SECTION 10—OPTIONS
9000 Topaz™Wheelchair 44 Part No. 1100869
SECTION 10—OPTIONS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Installing Crutch and Cane Carrier
NOTE: For this procedure, refer to FIGURE 10.1.
Installing
1. Slide the clamp with the base attached over the end of the step tube of the wheelchair.
2. Position the base parallel to the step tube.
3. Securely tighten the locknut that secures the base to the step tube of the wheelchair.
4. Remove the upper back upholstery screw and washer.
5. Align the strap with the back upholstery screw mounting hole.
6. Secure the strap to the wheelchair with the back upholstery screw and washer.
Safety and Maintenance
1. Check base weekly to assure proper placement.
2. Securely fasten strap while carrying items.
3. Never insert or remove items while wheelchair is moving.
4. Base should be parallel to step tube to avoid bending spokes when folding the
wheelchair.
5. The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with
mild soap and water.
FIGURE 10.1 Installing Crutch and Cane Carrier
Locknut
Step
Tube
Clamp
Base
Strap