Filter
Top Products
13 ANTI-TIPPER
Part No 1171880 89 Invacare
®
Top End Reveal
™
Wheelchair
13 Anti-Tipper
13.1 Adjusting/Replacing Anti-tipper
ƽ
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely -
otherwise injury or damage may occur.
For this procedure, refer to FIGURE1 on page 91 and FIGURE2 on page 92.
ƽ
WARNING
Anti-tippers MUST be attached at all times. Inasmuch as the anti-tippers are an option on this wheelchair (you may order it
with or without the anti-tippers), Invacare strongly recommends ordering the anti-tippers as an additional safeguard for the
wheelchair user.
Anti-tippers MUST be fully engaged. Ensure the lock buttons of the anti-tippers fully protrudes out of the mounting hole in
the anti-tipper bracket.
Ensure both anti-tippers are adjusted to the same height.
To ensure the correct model anti-tipper is used refer to FIGURE1. Measurements for anti-tippers are approximate and are
taken using the top adjustment hole on the anti-tipper (Detail “A”).