Filter
Top Products
8 BACK
Part No 1171880 57 Invacare
®
Top End Reveal
™
Wheelchair
8.5 Back Height Adjustment
1. Remove the back upholstery cover and adjustable tension back upholstery. Refer to Removing/Installing the Back Upholstery Cover, Adjustable
Tension Back Upholstery and Lumbar Strap on page 52.
2. Press the adjustment pin on the back cane insert tube in and adjust the back height to one of four heights depending on original back height:
3. Reinstall the back upholstery cover and adjustable tension back upholstery. Refer to Removing/Installing the Back Upholstery Cover, Adjustable
Tension Back Upholstery and Lumbar Strap on page 52.
4. Check the tautness of the back. Refer to Adjusting the Back Tension on page 51.
Observe the tautness of the back upholstery for reinstallation.
For this procedure, refer to FIGURE10 on page 58.
ƽ
WARNING
Adjustment pin MUST be protruding through hole in back cane.
Ensure that both back cane inserts are at the same height BEFORE reassembling the wheelchair.
HOLE* NUMBER BACK HEIGHT (IN INCHES)
8 - 11 10 - 14 12-16 14 - 18 16-20
1 8 10 12 14 16
2 9 11 13 15 17
3 1012141618
4 1113151719
5 NA14161820
*Holes numbered from bottom to top for reference only. (There are no numbers on the back canes.)