Filter
Top Products
12 CASTER
Invacare
®
Top End Reveal
™
Wheelchair 86 Part No 1171880
FIGURE5 Repositioning the Front Caster Housings
12.5 Caster Housing Angle Adjustment
Small Angle Adjustments
1. If necessary, loosen the top mounting screw (Detail “A”).
2. Position a large right triangle or “L” square on the ground/floor and against the caster fork (Detail “C”).
For this procedure, refer to FIGURE6 on page 88.
The round adjustment nuts for smaller (fine tuning) angle adjustments.
The square adjustment block is for larger angle adjustments.
DETAIL “A” - INSIDE VIEW OF
CASTER HOUSING
DETAIL “B” - OUTSIDE VIEW OF
CASTER HOUSING
Top Mounting Screw
Front Frame
Round Adjustment Nut
Square Adjustment
Nut
Caster Housing
Front Frame
Bottom Mounting
Screw
Belleville Washer
Belleville Washer
Base