Filter
Top Products
7 ARMS
Part No 1171880 37 Invacare
®
Top End Reveal
™
Wheelchair
FIGURE1 Disconnect Back Release Cord
5. Remove the rear seat upholstery mounting screw and short
mounting screw (FIGURE2).
6. Remove the back stop insert from seat rail (FIGURE2).
7. Perform STEPS 5-6 on remaining back stop insert.
8. Secure the back stop insert weldment to the armrest socket, in the
orientation shown, with two mounting screws, four washers, and
two locknuts. Tighten securely (FIGURE3).
9. Perform STEP 8 for remaining back stop insert weldment/armrest
socket.
FIGURE2 Remove Back Stop Insert
Split Ring
Back Release Cord
Plunger Pin
Back Stop Insert
Rear Seat Upholstery
Mounting Screw
Short
Mounting
Screw
Back Stop
Insert