Filter
Top Products
12 CASTER
Invacare
®
Top End Reveal
™
Wheelchair 84 Part No 1171880
Installing Fork Assembly
1. Perform one of the following:
• Standard Forks - Using a locknut, secure the spectre and fork to the fork stem (Detail “A”).
• One Sided Fork (Detail “B”)
a. Apply Loctite 242 on stem threads.
b. Screw fork stem into caster housing. Tighten securely.
2. Install the front caster. Refer to Installing Front Caster
on page 82.
FIGURE4 Removing/Installing the Fork Assembly
ƽ
WARNING
Use Loctite™242 on threads fork stem when reinstalling the one sided fork into the caster housing. Otherwise, the fork
may become loose and disengage from the headtube. Possible injury or damage could result.
Spacer orientation must be as shown in FIGURE1.
Fork
Stem
Locknut
(Hidden)
Fork
DETAIL “A” -
STANDARD FORK
DETAIL “B” - ONE
SIDED FORK
Caster Housing
Fork Stem
This side is top and
must face up