Filter
Top Products
6 FOOTREST
Invacare
®
Top End Reveal
™
Wheelchair 32 Part No 1171880
6 Footrest
6.1 Adjusting/Replacing Standard Footrest
Adjusting the Footrest
1. Remove the two mounting screws and locknuts that secure the footrest to the wheelchair frame.
2. Adjust footrest to desired height.
3. Reinstall the two mounting screws to secure the footrest to the wheelchair frame.
ƽ
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
ALWAYS perform this procedure in the presence of an assistant. The position of the footrest, camber tube, seat angle,
back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs
stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The addition of anti-tippers may be required.
Check ALL mounting screws that secure the footrest/raised footrest system to the wheelchair frame to make sure they are
securely tightened BEFORE using the wheelchair. ESPECIALLY if engaging in ANY contact sport.
The footrest assembly MUST be at least 1¾-inches above the ground/floor to avoid hitting protruding objects when using
this wheelchair.
The standard footrest has an open hoop. A footplate cover is recommended for wheelchair users that have leg spasticity or
whose feet have a possibility of falling through the footrest hoop. A calf strap is provided with each wheelchair to prevent
the feet from slipping backwards off of the footrest. Be sure the calf strap is secure when using the wheelchair.
For this procedure, refer to FIGURE1 on page 33.