Filter
Top Products
7 ARMS
Part No 1171880 41 Invacare
®
Top End Reveal
™
Wheelchair
7.2 Installing/Removing/Adjusting the Swingaway
Padded Armrest
Installing
1. Tighten mounting bolt and locknut in desired mounting hole.
2. Insert swing away padded armrest into armrest socket so that
notch fits around mounting bolt.
Removing
1. Remove swing away padded armrest from armrest socket.
Adjusting Height
1. Remove the swing away padded armrest from the arm socket.
2. Remove the mounting bolt and locknut mounted in the arm socket.
3. Reposition mounting bolt to one of three positions in the arm
socket depending on the desired height.
4. Install locknut and tighten.
5. Reinstall the swing away padded armrest into the arm socket.
6. Repeat STEPS 1-5 for the opposite side, if necessary.
FIGURE6 Installing/Removing/Adjusting the Swingaway Padded
Armrest
Swingaway Padded
Armrest
Arm
Socket
Mounting Bolt
Locknut
Three Mounting
Positions