Filter
Top Products
7 ARMS
Invacare
®
Top End Reveal
™
Wheelchair 36 Part No 1171880
7 Arms
7.1 Installing the Swingaway Padded Armrest Socket
1. Remove the back. Refer to Removing/Installing the Back Frame on page 59.
2. Remove the split ring of the back release cord from the plunger pin in the back stop insert.
3. Remove the plunger pin from the back stop insert.
4. Perform STEPS 2-3 on remaining back stop insert.
ƽ
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
DO NOT attempt to lift or tilt a wheelchair by using any removable (detachable) parts. Lifting by means of any removable
(detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.
For this procedure, refer to FIGURE1 on page 37, FIGURE2 on page 37, and FIGURE3 on page 38.
ƽ
WARNING
Plunger pin is spring loaded and can be projectile. Use caution when removing, otherwise injury may occur.