Filter
Top Products
•
<seri> indicates a serial number is required.
•
<res> indicates a resistance value is required.
•
<volt> indicates a voltage value is required.
•
<unit> indicates a temperature unit is required.
•
<pass> indicates a password is required.
•
<port> indicates a port number is required.
•
<label> indicates an eight character label is required.
•
<year> indicates a four digit number is required.
•
<month> indicates a one or two digit number is required.
•
<day> indicates a one or two digit number is required.
•
<hour> indicates a one or two digit number is required.
•
<minute> indicates a one or two digit number is required.
•
<second> indicates a one or two digit number is required.
• <baud> indicates a valid baud number is required.
8.4.1 Measurement Commands
The measurement commands are used to read information on the statistical cal-
culations and for reading the most recent measurement for a specified channel.
The measurement commands are not password protected.
8.4.1.1 CALCulate:AVERage:CLEar
Clears the statistical functions for all channels.
CALC:AVER:CLE
The *RST command clears the statistical functions.
8.4.1.2 CALCulate<chn>:AVERage<n>:DATA?
Returns the value of a statistical calculation for a given channel.
CALC3:AVER1:DATA?
0.017
The CALCulate suffix, <chn>, specifies the channel (1 to 4). The AVERage
suffix, <n>, specifies the calculation type. See Table 4 on page 122 for the Sta
-
tistical Calculation Types.
8.4.1.3 CALCulate:AVERage<n>:TYPE?
Returns the keyword for the specified field type number.
CALC:AVER2:TYPE
STD
1529 Chub-E4 Thermometer Readout
User’s Guide
86