Filter
Top Products
Instruction Manual
IM-106-910Xi, Original Issue
November 2010
Xi Advanced Electronics
http://www.raihome.com
Section 2 Installation
System Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Xi Advanced Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-5
Xi Advanced Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-5
Optional Flame Safety Interlock . . . . . . . . . . . . . . . . . . . . page 2-7
Traditional Architecture Cable Connections . . . . . . . . . . page 2-7
NOTE
All unused ports on the probe housing and Xi enclosure should be plugged
with a suitable fitting.
Before installing this equipment read the "Safety instructions for the wiring and installation of
this apparatus" at the front of this Instruction Manual. Failure to follow safety instructions
could result in serious injury or death.
Install all protective equipment covers and safety ground leads after installation. Failure to
install covers and ground leads could result in serious injury or death.
The Xi Advanced Electronics can be installed in general purpose areas only. Do not install
the Xi in hazardous areas or in the vicinity of flammable liquids.
If external loop power is used, the power supply must be a safety extra low voltage (SELV)
type.